Wednesday, April 27, 2016
Wednesday, April 20, 2016
CableSupply.com's Jim Gibson shows us how to use a Push Pole in this Throwback Video. A push pole (also called a gopher pole) greatly simplifies the task of installing cable by extending your reach. CableSupply Sku 100382 >> Purchase at cablesupply.com
Thursday, April 14, 2016
Tuesday, April 12, 2016
Jim Gibson from CableSupply.com and his team of technicians take you behind the scenes of a cabling installation in progress. Learn how the technicians run phone and data cables using push poles and fishing rods, and how they terminate ends and punch them down, and more.
Products Featured: Push Pole Reference: 100382
>> Browse Cable Pulling Tools @ cablesupply.com
Monday, April 11, 2016
In this video we talk about the RJ (Registered Jack) 11 jack and its uses. RJ11 stands for registered jack and was originally designed by phone companies in the 70’s and is used for analog voice lines. It is a single pair jack, a jack with 2 wires. It is typical to find RJ11s with 6 positions, which are the metallic pins on the underside of a phone jack. To make a RJ11 a mod plug, crimper, and cable is needed. Slide one pair, two wires, into the mod plug so that they line up with the two center pins which are the first position. Place the mod plug with the cable in it into a crimper and close it down on the mod plug. This will cause the pins that were previously slightly raised to crimp down on the wire, cutting through the wire housing and creating a connection.